Miracle 360 WildLove Sippy Cup: First Feeding Tips

By Baby Products & Accessories | Munchkin | Published: 2026-10-24

Category: How-to Guides

Learn how to introduce the Miracle 360 WildLove Sippy Cup to your baby, with step-by-step first-use tips for a smooth transition to open-cup drinking.

Quick answer

Start by letting your baby explore the cup dry, then offer a small amount of water while tilting the cup slightly to show how the 360° edge works.

Why the 360° edge works differently

Unlike traditional sippy cups with a spout, the Miracle 360 WildLove cup uses a valve around the entire rim. Your baby can drink from any side by tilting and sucking the edge. This design mimics a real open cup, making the transition easier later.

The cup automatically seals when your baby stops drinking, which reduces spills. However, because the valve requires suction, some babies may need a few tries to get the hang of it. Be patient—most babies master it within a week.

Step-by-step: First use of the Miracle 360 WildLove Cup

1. Wash and assemble: Disassemble the cup and wash all parts in warm, soapy water. Rinse thoroughly. The valve sits inside the rim—make sure it's seated evenly so the cup seals properly. A misaligned valve is the most common cause of leaks.
2. Let baby explore dry: Give the empty cup to your baby during playtime. Let them hold it, look at the animal artwork, and practice putting the rim to their mouth without liquid. This builds familiarity.
3. Add a small amount of water: Fill the cup with no more than 1–2 ounces of water. Hold the cup for your baby at a slight tilt—about 45 degrees—so the liquid reaches the valve. Demonstrate by sipping yourself if needed. Too much liquid can overwhelm; start small.
4. Encourage sucking the edge: Guide the rim to your baby's lips and gently tilt. The valve releases liquid when your baby sucks. If they chew or bite the rim, that's normal—they're learning. Stay calm and try again later. Biting the rim won't damage the cup, but it won't release water.
5. Increase liquid gradually: Once your baby drinks reliably from the 360° edge, increase to 4–6 ounces. The 9oz size is great for water or milk at meals. Always supervise drinking.
6. Clean the valve after each use: Rinse the valve under running water and use the small brush (if included) or your finger to remove any milk residue. Air-dry fully before reassembling to prevent mold. Mold can develop if the valve stays damp—clean and dry thoroughly.

Product facts

Miracle® 360° WildLove Sippy Cup, 9oz: 100% Recycled and Recyclable Packaging - expands to teach your little one about each animal and its beautiful, at-risk habitat. The packaging doubles as a learning tool, so you can turn cup introduction into a mini nature lesson about endangered species.
Miracle® 360° WildLove Sippy Cup, 9oz