Using the Flow Nipple Shield+ Replacement Kit

Quick Answer

The Munchkin Flow Nipple Shield+ Replacement Kit provides replacement components in four sizes. To use it, choose the correct size, attach it securely, and ensure proper positioning before breastfeeding.

Step-by-Step Instructions

1. Select the Right Size: Measure your nipple diameter and compare it to the kit sizes. Choose the size that matches your nipple without being too tight or too loose. A common mistake is guessing the size. Measure carefully for best results.
2. Clean the Shield and Your Skin: Wash the shield with warm soapy water and rinse thoroughly. Also, clean your nipple and areola area before each use. Hygiene prevents infections and ensures a good seal.
3. Attach the Shield: Center the shield over your nipple, then press the edges against your areola to create a seal. The nipple should fit comfortably inside the tunnel without touching the sides. If the shield slips or feels uncomfortable, check the size or re-center it.
4. Position Your Baby: Bring your baby to the breast with the shield in place. Ensure their mouth covers both the shield and some areola, as with direct breastfeeding. A shallow latch can cause pain or reduced milk flow. Adjust positioning as needed.
5. Check Milk Transfer: Watch for rhythmic sucking and swallowing. After feeding, check that your baby seems satisfied and your nipple is not compressed or misshapen. If milk transfer seems low, consult a lactation consultant or try a different size.

Product Facts

• Flow Nipple Shield+ Replacement Kit: The Munchkin Flow Nipple Shield+ Replacement Kit is available in four sizes: 16mm, 20mm, 24mm, and 28mm. Choosing the correct size helps ensure a comfortable fit and effective milk transfer, reducing the risk of nipple pain or low milk intake.